Chrysler 2007 Town and Country, Manual, Page: 124 / 504

Share

Page: 124 / 504

Chrysler 2007 Town and Country Manual Download Page 124

Manual Reclining Seats — If Equipped

The recliner mechanism control is on the outboard side of
the seat. To recline, lean forward slightly, lift the lever,
then push back to the desired position and release the
lever. Lean forward and lift the lever to return the
seatback to its normal position. Using body pressure, lean
forward and rearward on the seat to be sure the seatback
has latched.

Manual Reclining Seat Control

124

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

«
...
122
123
124
125
126
...
»

Summary of Contents for 2007 Town and Country

























































































































































































































































































































































































































































































































Reviews:

No comments