Chrysler 2007 Town and Country Manual Download Page 37

Page: 37 / 504

Child Protection Door Lock

To provide a safer environment for small children riding
in the rear seats, the sliding doors are equipped with a
child protection door lock system.

NOTE:

When the child lock system is engaged, the door

can be opened only by using the outside door handle
even though the inside door lock is in the unlocked
position.

To Engage the Child Protection Door Lock

To activate the system:

1. Open the sliding door.

2. Insert the tip of the vehicle’s ignition key (or any alike
item) into the child lock control and slide it sidewards.

3. Repeat Steps 1 and 2 on the opposite sliding door.

NOTE:

•

After engaging the child protection door lock system,
always test the door from the inside to make certain it
is in the desired position.

Child Lock Control

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Summary of Contents for 2007 Town and Country

























































































































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Town and Country

Reviews:

Related manuals for 2007 Town and Country

Brands by name

Popular brands

Chrysler 2007 Town and Country, Manual

Search results

Summary of Contents for 2007 Town and Country

Reviews:

Related manuals for 2007 Town and Country

Brands by name

Popular brands