- 4 -
2-3. Important
Warning
In order to avoid severe accidents always read these contents and
understand them.
1
．
Confirm the power supply voltage and wiring
Before supplying the power to the instrument, check that the wiring is correct, power supply voltage
matches with the rated voltage and grounding is done.
2
．
Install over current protection device
The controller does not have a power supply switch. Install an over current protection device (Breaker
etc.) that matches the rating specifications, in the power supply of the controller.
3
．
Protection
of
terminal
To prevent electric shock, provide the terminal of the controller with safety measures such that the user
will not directly be able to touch the final product.
4
．
Installing the safety device
Regarding the use of a device that anticipates a big loss due to failure of the controller and the
peripheral devices, always install a safety device for preventing these losses and implement fail safe
design in the final product. Do not use it in important utilities facilities in which human life, atomic energy,
aviation, space etc, are involved.
5
．
Do not put your hands inside the controller
Do not put your hand or a tool inside the controller. You may get an injury or an electric shock.
6
．
Power cut off in case of suspicion
If there is an offensive smell, a strange noise or smoke or if the temperature increases abnormally, it is
very risky hence cut off the power supply immediately and contact the dealer or our nearest office.
7
．
Prohibiting repairing and remodeling
If repairing or remodeling is necessary, contact the dealer or our nearest office. Only the service
engineers appointed by our company will change the parts, do the repairing and remodeling.
8
．
Strictly follow the instruction manual
In order to use the controller correctly and safely, follow this instruction manual. Please understand
beforehand that our company will not at all be responsible for any claims for injury, damage, and passive
damage due to wrong use of the product.
Summary of Contents for KP 2000 Series
Page 1: ...INST No INE 809A Digital Program Controller KP2000 General ...
Page 2: ......
Page 143: ......
