Chino KP 2000 Series, Instructions Manual

Page: 53 / 144

- 50 -
7-8. Mode 6
Mode 6 performs the setting related to time event
Settings screen Description of the screen
1. Mode screen
[Lock status]
[Display OFF status]
① Mode 6 screen.
② By clicking the

･

key, 'Lock' and 'NoDisp' is displayed.
③
For mode 6 settings screen, if setting change is to be prohibited
select 'Lock'.
④
When doing the settings by communications, set all the mode
screens to 'Lock'.
⑤
When settings screen of mode 6 is not displayed, select 'NoDisp'.
2. Time signal
8 types
①
Displays only the instrument with external signal output (DO).
②
Set 8 types of time signal.
③
Set time from the time of starting the step to switching the time
signal ON, in 'ON', and set the time from the time of switching the
time signal ON to switching it OFF in 'OFF'.
④
Set the unit in 'time unit' of mode 2.
⑤
After the settings, it is necessary to set the time signal number that
is to be used for each pattern/step in mode 2.
3. Real temperature compensation
8 types
①
Set 8 types of real temperature compensations.
②
After the settings, it is necessary to set real temperature
compensation number that is to be used for each pattern/step in
mode 2.
③ When measurement range, unit, measurement scope, linear scale
etc is changed, sometimes the setting range and decimal point
position changes automatically and relatively, hence take care.
4. Waiting time alarm
8 types
①
Set 8 types of waiting time alarms.
②
Unit is the unit set in 'time unit' of mode 2.
③
After the settings, it is necessary to set the waiting time alarm
number that is to be used for each pattern/step in mode 2.
Start step
End step
Time signal ON
ON setting time
OFF settings time