Chino KP 2000 Series, Instructions Manual

Page: 52 / 144

- 49 -
7. Sensor correction 8 types
①
Set 8 types of sensor corrections (PV bias).
②
After the settings, it is necessary to set the sensor correction that is
to be used for each pattern/step in mode 2.
③
When measurement range, unit, measurement scope, linear scale
etc is changed, sometimes the setting range and decimal point
position changes automatically and relatively, hence take care.
8. PV decimal point
① Set the decimal point position of PV.
② Based on the decimal point position that is set, up to five digits
including the integer part are displayed. Hence only if the number of
digits of integer is less, more number of digits after the decimal point
can be displayed within the range of decimal point position that is
set.
③
When measurement range, unit, linear scale etc is changed,
sometimes setting range and decimal point position changes
automatically and relatively hence take care.
9. Digital filter
①
Do the first-order lag operation in PV. It is a valid function when PV
is unstable.
10. SV decimal point for
displaying
①
Set the decimal point position of SV which is displayed at the upper
display.
②
Based on the decimal point position that is set, up to five digits
including the integer part are displayed. Hence only if the number of
digits of integer is less, more number of digits after the decimal point
can be displayed within the range of decimal point position that is
set.
③
When measurement range, unit, linear scale etc is changed, setting
range and decimal point position may change automatically hence
take care.