Chino KP 2000 Series, Instructions Manual

Page: 27 / 144

- 24 -
6-2 Time display screen
Time display screen Description of screen
[Elapsed time display]
[Remaining time display]
①
On the left bottom, a snap display of three steps, the
executing step in the middle and its previous and the next
step are displayed. In case of RUN status, the executing step
in the middle blinks.
②
On the upper side is the bar graph corresponding to the
progress time of program pattern and on the lower right its
progress time is displayed digitally.
③
Progress time selects arbitrarily from four types from [Time
display system] of mode 1.
STP
･･･ Executing step display
PTN ･･･ Executing pattern display
Time format (H:M) is automatically changed/displayed
depending on the length of time of pattern or step.
Time display format can also be changed by using  key.
6-3 Program pattern overall display screen
Time display screen Description of screen
[Condition of program RESET]
[Condition of program RUN]
[Condition of program unsetting]
①
It is program pattern which is set at mode 2, and brief
program pattern of selected setting number is displayed.
②
When it is Run condition, blinking bar is displayed and the
bar moves according to status.
③ If put in the STOP condition, bar is turned brink to light and
stop when program is stopped.
④ Indicate horizontal axis is time and vertical axis is SV.
When program pattern is not set, display [PATTERN NO
SETTING].