S Layer 2 Managed Switch User Manual
陈泽科技有限公司
www.stephen-tele.com
81
Set accept frame type of Trunk
accept frame-type <
frame type >
Example
：
Switch(trunk 1)# accept frame-type tagged
Note
：
frame type can be”all” or ”tagged”
，
”all” means the Trunk group member can accept all frame tag and untag
，
”tagged”
means the Trunk group member can accept only frame with vlan tag.
Add the Trunk group member port into the 802.1Q VLAN group
add < member type> <VLAN group>
Example
：
Switch(trunk 1)# add tagged-vlan 2
Note
：
member type can be ”tagged-vlan” and ” untagged-vlan”
，
”tagged-vlan” indicate all the trunk group member add into
the VLAN as tagged member
，
”untagged-vlan” indicate all the trunk group member add into the VLAN as untagged member.
The VLAN group should be an existing VLAN, or this can’t add successfully.
Delete Trunk from a 802.1Q VLAN group
delete <member type> <VLAN group>
Example
：
Switch(trunk 1)# delete tagged-vlan 2
Note
：
member type has ”tagged-vlan” and ” untagged-vlan”. The VLAN group must be in exist,and the member type should
match with the truck group member type, or the delete can’t be succeed.
View the configuration information of the Trunk group
config <choosable parameter’all’>
Example
：
Switch(trunk 1)# config all
TGID MODE PortsList STATUS
1 Smac Disable
2 Smac Disable
Note
：
The parameter can be added is “all”
，
if ”all” is not chosen means view the present trunk group configuration
information.
