S Layer 2 Managed Switch User Manual
陈泽科技有限公司
www.stephen-tele.com
80
System name : S
Note
：
The length of system name character strings should be less than 255 English character
Password change
password
Example
：
Switch(system)# password
new password: ****************
re-type password: ****************
Note
：
password can be English character, number and character ”!@#$%^&*()”. The maximum length can’t exceed 16
characters.
Restart switch
reboot
Example
：
Switch(system)# reboot
Do you wish to continue? [Y/N]: y
Resetting ...
Restore to default settings
restore default
Example
：
Switch(system)# restore default
Note
：
After restore to the default settings the switch will restart.
telnet enable and disable
telnet <setting status>
Example
：
Switch(system)# telnet enable
Note
：
”enable” indicates telnet function is open
，
”disable” indicate the telnet function is close.
Web enable and disable
web < setting status >
Example
：
Switch(system)#web enable
Upgrade the system software or configuration file through TFTP
tftp download <upgrade type> <TFTP server IP address> <file name>
Example
：
Switch(system)# tftp download system 192.168.0.8 ch-s2026+.bin
Note
：
upgrade type is”system” means upgrade the system software, is ”configuration” means upgrade the configuration file
of the switch. The TFTP server IP address should be in the same IP group with the switch.
Save configuration file through TFTP
tftp upload configuration < TFTP server IP address> <file name>
Example
：
tftp upload configuration 192.168.0.8 config.dat
Note
：
The TFTP server IP address should be in the same IP group with the switch. After savingthe configuration file will be
saved under the TFTP server root directory.
6.4.5
Trunk setting command
：
：
：
：
Trunk setting menu as below
：
