S Layer 2 Managed Switch User Manual
陈泽科技有限公司
www.stephen-tele.com
46
Fig 5-29 Forward table
The table Show the information of the forwarding addresses in the FDB table. Each address must be unicast address, the
port No corresponds to VLAN+ MAC address. Status indicates the address is dynamic learning or MAC binding.
5
．
．
．
．
3
．
．
．
．
3
．
．
．
．
7
MAC Bingding
Binding address is non-aging address, but it’s different from static address, this provides filtration for data source. The bound
address is also static, it will be effective until it’s deleted, and it’s not restricted by max aging time. When MAC address is
bound, the ingress frames will be transmitted only when its source address exists in the bound address table, otherwise, it
will be discard.
This page provides operations for adding or deleting bound address in the bound MAC address table. The bound address can
be set in port 1-24, and the max bound MAC address is not restricted.
The bound address is divided into groups according to ports. Select the port NO., the page will show the bound address of
this port. Enter the MAC address in the “Mac” column, and press “Add” or “Delete” to add or delete.
Fig 5-30 MAC Binding
Number
：
Show the table position of the address.
