S Layer 2 Managed Switch User Manual
陈泽科技有限公司
www.stephen-tele.com
74
priority 6 mapcos:highest
priority 7 mapcos:low
5): Check the setting with config command
Switch(QoS)# config
6.4.12 RMON command setting introduction
The menu of RMON configure is like such as below:
Alarm
Alarm
Example: Switch(rmon)# alarm
Note: This command is for TIPs Input command, there are a few of this type of command. Introduction of the
command:
Interval: the unit is seconds
Variable: the type should be INTEGER{INTEGER, Counter, Gauge or TimeTicks}.
Delete one alarm index
alarm delete <index>
example
：
Switch(rmon)# alarm delete 1
Event found command
Event
example
：
Switch(rmon)# event
Event delete command
Event del <index>
example
：
Switch(rmon)# event delete 1
