S Layer 2 Managed Switch User Manual
陈泽科技有限公司
www.stephen-tele.com
36
Cli Idle time: refers to how long time if user does not operate switch CLI command, switch will return to login page. This
time must be configured between 1-100 seconds.
System position: refers to switch’s position. User can configure this value to 1-255 English characters.
System contact information: refers to switch contact information. User can configure this value to 1-255 English
characters.
Product name: switch name. User can configure this value to 1-255 English characters.
5.3.1.2 Switch information
The configuration shows as the figure below:
Figure 5-10 Switch information
Spanning Tree: Open/Close spanning tree.
IGMP snooping: Open/Close IGMP protocol.
DHCP: Open/Close DHCP client to acquire IP address automatically.
802.1X: Open/Close 802.1X authentication function.
5.3.1.1 System password configuration
Configurations show as figure below:
Figure 5-11 System password configuration
New password: password that user is going to use.
New password confirm: retype new password once.
5.3.1.4 File transferring
Configurations show as the figure below:
