S Layer 2 Managed Switch User Manual
陈泽科技有限公司
www.stephen-tele.com
66
6): Check the port monitor with config command:
Switch(mirror)# conf
Mirror Mode : Enable
Monitor Port : 3
Source PortList : 1
Ingress Mode : Source
Ingess MAC : 00-00-00-00-01-01
Ingress Diviter : 102
Egress Mode : All
Egress MAC :
Egress Diviter 0
Via such this setting, the PC C can monitor the data bag which PC A into switch.
6.4.8 Command of network configure introduction
The menu of network configure as below:
Display the IP address of nowadays switch
config ip
example
：
Switch(network)# config ip
Ip Address : 192.168.0.8
Subnet Mask : 255.255.255.0
Default Gateway : 0.0.0.0
Dhcp status : Disable
Display the ARP address list of nowadays switch
config arp
example
：
Switch(network)# config arp
LINK LEVEL ARP TABLE
Destination LL Address Flags Refcnt Use Interface
---------------------------------------------------------------------
192.168.0.89 00:e0:4c:29:06:1c 0x8405 12 2519 sw0
---------------------------------------------------------------------
