S Layer 2 Managed Switch User Manual
陈泽科技有限公司
www.stephen-tele.com
33
Press the right button of the mouse; choose Properties in the menu existed. The following screen will exist.
Choose
Settings,
set
1024x768,
press
Apply
or
OK.
If you feel the screen twinkle after you modify the definition. Please click
“advanced” button. Adjust display refreshing rate in the pop out window. You can configure switch through WEB via previous
setting.
Notice:
There are some requirements of PC hardware device to set screen definition to 1024X768. For those old PCs you may not
configure it this way.
Figure 5-5
5
．
．
．
．
2
．
．
．
．
2 Connection
We suppose the IP address of the Switch is 192.168.1.254, you can input http:// 192.168.1.254 in the IE to connect the
Switch. Then press
Enter
, the following screen will exist.
Figure 5-6
Enter user name and passwords (the switch’s default user name is “admin”,and the default password is “admin” too). Press
“Ok”, enter WEB switch management homepage.
