S Layer 2 Managed Switch User Manual
陈泽科技有限公司
www.stephen-tele.com
71
Note: the level must be between 0 and 7.
Setting the default VLAN TAG of the ports
pvid <VLAN ID>
example
：
Switch(port(1-1))# pvid 2
Note: the VLAN ID must be between 1-4094.
Display the statistics of ports of nowadays switch
statistics display
example
：
Switch(port(22-22))# statistics display
Port 22 Statistics
ifInOctets : 36678814
ifInUcastPkts : 303700
ifInNUcastPkts : 19089
ifInDiscards : 0
ifInErrors : 0
ifInUnknownProtos : 0
ifOutOctets : 182061136
ifOutUcastPkts : 361910
ifOutNUcastPkts : 30133
ifOutDiscards : 0
ifOutErrors : 0
Clear the statistics of ports of nowadays
statistics clear
example
：
Switch(port(22-22))# statistics clear
Setting the broadcast storm control
storm control
example
：
Switch(port(22-22))# storm control
BroadCast Suppress: enable
Multicast Suppress : enable
DLF Suppress : enable
packet percent: 20
Note: this command is DOS prompt type, for Broadcast Suppress, Multicast Suppress, DLF Suppress, just can key in
“enable”or”unable”,and for packet percent, just only choice ”3”,”5”, “10”, “20”. If choice the Broadcast Suppress, Multicast
Suppress, DLF Suppress all is “disable”, the item which “packet percent’ will not request key in any.
6.4.10 command of QOS Configuration introduce
The menu of priority setting as below:
