S Layer 2 Managed Switch User Manual
陈泽科技有限公司
www.stephen-tele.com
42
5
．
．
．
．
3
．
．
．
．
2
．
．
．
．
7
Port Rate Control
Figure 5-22 Bandwidth of the Port setting
（
part of the port
）
Ingress Control: “Enable”denotes to control the ingress port rate of the port,“Disable” denotes not to control the ingress
port rate of the port.
Ingress rate
：
there are 12 different rates from “64K” to “100M” for 100M port, 15 different rates from “64K” to “1000M”
for 1000M port. You can choose the rate only when the “Ingress Control” is “Enable”.
Egress Control: “Enable”denotes to control the Egress port rate of the port,“Disable” denotes not to control the Egress
port rate of the port.
Egress rate
：
there are 12 different rates from “64K” to “100M” for 100M port, 15 different rates from “64K” to “1000M”
for 1000M port. You can choose the rate only when the “Egress Control” is “Enable”.
Illumination
：
This page provides quick-change function for 100M ports. Select “Enable”, and select the rate, then press “Change”, all
the port rates of the ports that are enabled the control function will be changed.
