Chery TIGGO, Owner'S Manual, Page: 96 / 154

Driving
95
Wading
If the vehicle has to wade during traveling, you
must drive carefully and slowly, especially when
you don’t know the depth of the water.
When wading, both the traction force and brake
performance reduce, and the vehicle has the risk
of stop.
If the water goes into the air intake pipe of engine,
it will cause serious damage to the engine. If
wading deeply, the water entering the transmission
through air vent of transmission, it will damage the
transmission.
After wading, you must drive the vehicle slowly and
step on the brake pedal lightly for several times to
remove the water on the brake.
Function Definition of Cruise Buttons
1. The ignition switch is turned to position ON,
press the cruise button ON, then the cruise
indicating light will light up on instrument panel and
blink (it is pre-cruise condition and normal); When
vehicle is driving within speed of 25-130km/h,
press the cruise button SET/- and vehicle will keep
running in constant cruise speed when button
SET/- is pressed (do not place foot onto
accelerator pedal, the cruise system will adjust the
throttle valve opening by road condition); then the
cruise indicating light will light up constantly
indicating the vehicle is in cruise.
If the cruise indicator lamp still blinks, it means the
vehicle is not in cruise mode; please try the cruise
function again. (If it still not works, please contact
with Chery authorized service station for overhaul)
2. In cruise condition, stepping down the
accelerator pedal will increase vehicle speed (the
cruise indicating light will light up constantly); after
releasing the accelerator pedal, vehicle will
resume the speed before stepping the accelerator
pedal;
3. In cruise condition, stepping down the
accelerator pedal will increase vehicle speed (the
cruise indicating light will light up constantly); on
releasing the accelerator pedal, pressing the
cruise button SET/- will make vehicle runs at new
cruise speed;
4. In cruise condition, each short pressing of button
ACC (less than 0.5s), vehicle cruise speed will be
added by 2km/h; in cruise condition, long pressing
the button
ACC (more than 0.5s), vehicle will
speed up continuously; on releasing the button
ACC, vehicle will stop accelerating and continue
running at speed when releasing the button ACC ;
the cruise indicating light will light up constantly.
(long press the ACC button is not suggested, or
else it will increase vehicle constantly and cause
dangerous to driving)
If the water is deep to submerge the
hub, you shall not drive forwards.