Chery TIGGO, Owner'S Manual, Page: 94 / 154

Driving
93
Gearshift Lever Lock
If needs to move gearshift lever from position P
to R, from N to R or from R to P, the limit button on
gearshift lever shall be pressed down to disable
shift lock. It is not need to press the limit button if
gearshift lever moves in other gear positions.
Starting up
Keep the engine running at idle speed and step
down the brake pedal, shift the gearshift lever to
one of driving gear; release the brake pedal and
vehicle will move slowly. Stepping down the
accelerator pedal will speed up the vehicle.
Under special circumstances, the vehicle can be
started in 2
nd
gear position at MT mode on snow
road.
Drive Out of Mud & Sand, Snow
If the driving wheel is bogged into mud & sand or
snow, you can try to move the vehicle forwards or
backwards repeatedly. Change the gearshift lever
between position D and R for several times and
step down the accelerator pedal slightly. Avoid
keeping shift the gear in position of forward gear
and reverse gear for long time, it will cause the
excessive wear of transmission, and the operation
time shall be less than 1 minute.
Try to keep the engine running in low speed before
the operation.
Forced Downshifting
When vehicle is running on steep slopes or
overtaking, the automatic transmission can provide
increased torque. To get the effect of forced
downshifting, you can step down the accelerator
pedal to the end and hold it in gear position D.
After engine comes to maximum speed,
transmission will get to next gear position.
Stopping on the Way
Release the accelerator pedal and step down the
foot brake, keep the gearshift lever in original
position. Please release the foot brake before
starting up.
The AT vehicle can not be started by
traction or pushing. Please connect the
connecting wire with support battery for jump
start.