Chery TIGGO, Owner'S Manual, Page: 104 / 154

Emergency Procedure
103
Clearance Lamp Bulb
1 . Remove the rear sealing cover, pull off lamp
seat connector and remove the damaged bulb.
2. Insert the new bulb seat into mounting hole,
connect the lamp seat connector and install the
rear cover.
Front Fog Lamp Bulb
Please lift up your vehicle and change the bulb
from its back if replacing the front fog lamp bulb. Or
remove the fog lamp for replacement. It is better to
ask Chery authorized service station to change the
fog lamp bulb.
Tail Lamp Bulb
1. Open the luggage boot cover; from the inner
side of luggage boot to loosen the clip of tail lamp
assembly cover. Pull the lamp assembly out
slightly.
2. Unscrew the lamp seat in reverse direction of
lock-up direction marked on lamp seat, remove the
lamp seat.
3. Slightly press down and rotate the bulb in
anti-clockwise direction, the bulb can be took out
for replacement.
4. The installation is in reverse order of removal.
5. Check if the lamp works normally after
installation.
High-mounted Brake Lamp Bulb
1. Open the luggage boot cover. Remove two
cross head screws and cover. Disconnect the wire
connector and take out the lamp assembly. Pull
out the cover and bulb for replacement.
2. The installation is in reverse order of removal.
License plate lamp bulb
Mounting position: lower the license plate lamp
panel
1. Unscrew and remove the tapping screws that
fixing the license plate lamp.
2. Pull out the lamp holder and then remove the
damaged bulb.
3. Mount the new bulb into the lamp holder and
then mount the lamp holder.
4. Fix the license plate with tapping screws.
Vehicle Interior Front Ceil Lamp Bulb
1. Turn off the vehicle interior lamp.
2. Insert the screwdriver between the lamp
housing and lamp cover to remove the lamp
cover carefully.
3. Replace the bulb and install the reflector.
4. The lamp cover shall be reinstalled into
mounting holes of the lamp housing.