Chery TIGGO, Owner'S Manual, Page: 90 / 154

Driving
89
Engine Operation for Vehicle Equipped
With AMT
Before starting engine, please shift to gear N, 1
st
gear or 2
nd
gear; when shifting to gear position N,
you can start engine without stepping brake pedal;
when shifting to 1
st
gear or 2
nd
gear, you cannot
start engine without stepping brake pedal.
Operation of AMT
R = reverse gear
N = neutral gear
A\M = selection of automatic, manual control
E = select the economic or normal mode
+ = up-shifting
— = downshifting
1. After starting vehicle, vehicle speed is 0km/h,
the transmission is in neutral gear; the gearshift
lever is placed in neutral position or TIP position.
(As shown in following figure: Fig.1: Neutral gear
position; Fig.2: TIP position)
2. The vehicle moving forwards or backwards can
be selected by driver; if going to shift 1
st
or 2
nd
gear, please step down the brake pedal and shift
the gearshift lever to “TIP” position or “+” position,
release the brake pedal and step down accelerator
pedal, vehicle can move forward.
3. Switch the manual mode to automatic mode: by
shifting the gearshift lever to automatic or manual
mode direction; the instrument tachometer display
will show “AUTO”; repeat the operation will active
the manual mode.
4. In manual gear shifting mode: push the gearshift
lever towards “+” for up-shifting to higher gear;
push the gearshift lever towards “-” for
downshifting to lower gear. In manual mode, the
up-shifting can be performed at any vehicle speed;
but downshifting only can be performed within
allowed vehicle speed.
Note: the operation and function of button “E” on
gearshift panel:
In automatic mode, the pressing of the button will
enable engine running at economic mode and
speed odometer will show “ECO”.
When driving forwards, it is forbidden
to shift to reverse gear position, otherwise the
transmission will be damaged which is not
covered by warranty of Chery.
Fig.1 Fig.2