Chery TIGGO, Owner'S Manual, Page: 91 / 154

Driving
90
Fuel consumption will be lowered in this mode;
pressing the button again will enable engine
running at normal mode, the vehicle power
performance of this mode will be stronger than
economic mode. The 2
nd
gear is shown as the
figure.
Vehicle starting up with AMT
Transmission
After starting engine, please step down the brake
pedal before shifting gears; on the ground with low
adhesion, you can shift to the 2
nd
gear at most for
starting up vehicle; after shifting the gear, please
release the brake pedal and step accelerator pedal
before starting driving. Without stepping the brake
pedal, vehicle cannot move even if shifted in gear
position.
Display of Gear Position
After turning on ignition switch, the gearshift lever
position is shown on LCD display in middle of
instrument panel.
The gear positions are shown as following figure:
Position R:
Position N:
Manual Mode:
In manual gearshift mode, the selected gear
position will be shown in digital form in display.
The 2
nd
gear is show as the figure:
Auto Mode
Under the auto gearshift mode, the current gear
position will be displayed on the screen in digital
form, while the instrument tachometer display
shows "AUTO" on the upper left side.
The 2
nd
gear is show as the figure:
When stepping the brake pedal in
emergency, whether in manual or automatic
mode, the downshifting can be performed
automatically without manual operation.