Chery TIGGO, Owner'S Manual, Page: 28 / 154

Instrument Panel
27
If the belt is normal, keep driving to the nearest
Chery authorized service station for overhaul;
Because the battery continues to discharge, all
unnecessary electrical appliances should be
turned off, including the air conditioning system.
If the belt is broken, never keep driving and have it
maintained by specialists.
Coolant Temperature Alarm Lamp
The lamp will go on for several seconds and then
off after the ignition switch is on. Several seconds
later, if the lamp is still on, and it flashes or goes on
due to over high coolant temperature or too low
coolant level while driving and the buzzer makes
alarm, if so, it is necessary to stop the car
immediately and shut off the engine, and check the
coolant level, then add coolant according to the
specifications; meanwhile contacting with Chery
service station without driving.
4WD System Failure Indicator
Some Tiggo models adopt intelligent 4WD system,
the indicator lamp will be on if 4WD system has
failure.
Engine Electronic Control Alarm Indicator
The alarm lamp is lit and the electronic control unit of
engine is in self-checking state when the ignition switch is
on; if the system is free of failure, the alarm lamp will go off
after starting; If it keeps on, it is necessary to check the
engine; if the lamp is lit
while driving, it indicates the malfunction occurs on
the electronic control unit of engine, please go to
the Chery authorized service station for overhaul
as soon as possible. Application scope:
◊ The
vehicle equipped with SQR481 , SQR484 engine
series.
Maintenance Alarm Lamp
If the accumulative mileage shown in the odometer
reaches the pre-set value (5,000km), the lamp will
go on to warn the customer to go to the Chery
authorized service station for maintenance. Note:
the technicians shall reset the maintenance
mileage to zero after maintenance.
Cruise Indicator
When the ignition is turned on and the cruise switch is
turned on; the cruise indicator lamp will flash indicating the
condition of cruise; in driving, the cruise indicator lamp will
be always on in cruise mode.
Warning of scald! When the engine is hot,
the cooling system is in high temperature and high
pressure conditions, so it is necessary to open the
radiator cover after engine cooling. It is forbidden to
touch radiator fan!