Chery TIGGO, Owner'S Manual, Page: 64 / 154

Operation & Adjustment of Vehicle inside Device
63
(2) Relative altitude
It shows the relative altitude between two locations
and cannot be adjusted; by pressing the button
“MOD”, it can be switched between altitude and
relative altitude;
The relative altitude measuring range is ±5200m;
the Min. variation range is 50m.
The display effect is shown as following:
After confirming the current location as the starting
point, to know the relative altitude between the
destination and current location, you can make
adjustment by following method:
1. Long press the button “ Mod” (
＞
5s), to
enter into relative altitude mode;
Meanwhile press the left button “ ” and right
button “ADJ” over 1s; then the relative altitude is
set as 0m.
2. After the vehicle reached to destination, the
display value shows the relative altitude
between two locations.
3. Under the relative altitude mode, long press
the button “ MOD” (
＞
5s), the display will
return to altitude mode.
Normally the error of basic Atmospheric pressure
gauge and altitude gauge shall meet the following
specifications:
Altitude
check
poin (m)
Corresponding
atmospheric
pressure
Indicating
error range
(m)
-200 1040 ±100
0 1013 ±100
500 955 ±150
1000 898 ±150
1500 845 ±150
2000 795 ±150
3000 701 ±200
4000 616 ±250
5000 540 ±300