Chery TIGGO, Owner'S Manual, Page: 26 / 154

Instrument Panel
25
Unclosed Door Alarm Lamp
This lamp will indicate any door is open if the
vehicle door is not closed properly after switching
the ignition switch.
Position Indicator Lamp (green)
When the clearance lamp is switched on,
this lamp is lit.
Unfastened Seat Belt Alarm Lamp
As the ignition switch is turned on, if the driver seat
belt is not plugged in, this lamp will be lit to warn
the driver to fasten the seat belt well.
Engine Malfunction Alarm Lamp
This warning lamp has two function status and
below is the introduction:
1. EOBD system failure indicator
The lamp is lit when the ignition switch is on, and
the EOBD system is in a self-checking state, if the
system is free of failure, then the alarm lamp will
go off after engine start; please check the engine if
the lamp always is on; if the alarm lamp is on while
driving, it means that the car electronic control
system has fault and the emission has exceeded
national standard
Ⅳ , please go to the Chery
authorized service station for overhaul.
Application scope:
◊ The vehicle equipped with SQR481 , SQR484
engine series is model with EOBD system (higher
than national III standard)
2. Engine electric control system failure warning
indicator
The lamp is lit when the ignition switch is on, and
the engine electric control system is in a
self-checking state, if the system is free of failure,
then the warning lamp will go off after engine start;
please check the engine if the lamp always is on; if
the alarm lamp is on while driving, it means that
the car electronic control system has fault, please
go to the Chery authorized service station for
overhaul.
Application scope:
◊ The vehicle model equipped with Mitsubishi
engine.
If the alarm lamp of brake system goes
on while driving, it means that one of double
circuits in brake system is faulty. In this case, drive
carefully and go to the nearest Chery authorized
service station for a professional overhaul. Taking
account of the seriously-reduced brake
performance and increased braking distance, keep
a wide distance from the front car while driving and
step hard on the pedal appropriately.
In the event that both the ABS malfunction alarm
lamp and the brake system alarm lamp continue to
be on at the same time, stop the car as quickly as
safety permits. Go to the Chery authorized service
station for brake system check before continuing
driving.