Chery TIGGO, Owner'S Manual, Page: 31 / 154

Instrument Panel
30
The right lower part displays the total mileage; the
right upper part displays time or single trip mileage.
The time display is in digital way.
Switching between Time and Single Trip
Mileage and regulating Method:
By spot pressing the regulating button on
odometer, the time and single trip mileage display
can be switched.
If the odometer shows single trip mileage, you can
reset the mileage to zero by long pressing the
regulating button.
If the odometer shows time, you can adjust the
clock by long pressing the regulating button.
(Combined instrument clock regulating method
for 09 model vehicle
)
1. Premise of regulating: turn off the ignition switch
and clearance lamp is on, then clock can be
regulated.
2. Regulating steps:
1. Long press the regulating button until the digital
hour starts blinking then releasing the regulating
button; now you can change the hour by pressing
the regulating knob;
2. Please hold on after regulating the digital hour
until the digital minute starts banking; you can
change the digital minute by pressing the
regulating knob;
3. The clock regulating is finished after the digital
minute is completed.
Engine Tachometer
It indicates the engine speed (RPM).
The right red range of dial gauge denotes the
maximum allowable speed range of engine in a
short time and at operating temperature after
running-in. However, it is recommended that the
gearshift lever should be shifted to a higher gear
when the hand reaches this range at latest or the
foot be moved off the pedal.
Notice:
An early shifting to high gear is significant for fuel
saving and noise reduction.
Shift to an adjoining gear in case of unstable
engine running.
Overspeed alarm
The speed of more than 120 km/h, instrument buzz
after three stop,
When the speed under 120 km/h after another,
more than 120 km/h, instrument continue to buzz
after three stop, so cycle.
Regulating button