Ceyear 4992A, User Manual

Page: 89 / 134

Chapter V Menu Description
77
[Advanced]→[SPAN/RBW]
Set the SPAN/RBW proportion.
[Advanced] →[Average OFF ON]
Enable or disable the function of continuously averaging the frequency values.
[Advanced]→ [Averaging number]
Set up average frequency.
[Advanced]→ [Detection type]
Set the detection type: [Normal], [Positive Peak], [Negative Peak], [Averaging], [Sampling] and
[Root Mean Square]. The default detection type is [Normal].
2. Transmitter
[Transmitter]
The window related to RF transmitter testing will pop up, including four functional windows: “RF
Meter”, “Receiver Setting”, “Demodulation Meter” and “Audio Source”. For specific settings of
corresponding menus, refer to Section 1.2, 1.2.1, 1.3 and 1.4 of this chapter.
3 Receipt
[Receiver]
The window related to RF receiver testing will pop up, including three functional windows: “RF
Source”, “Modulation Source’ and “Audio Meter”. For specific settings of corresponding menus,
refer to Section 1.1, 1.1.1 and 1.5 of this chapter.
4 Audio
[Audio]
The test instrument window related to audio will pop up, including two functional windows:
“Audio Source” and “Audio Meter”. For specific settings of corresponding menus, refer to Section
1.4 and 1.5 of this chapter.
5 Cable
[Cable]
The cable tester function window will pop up. For specific settings of corresponding menus, refer
to Section 1.7 of this chapter.