CERUS CI-007-P2, Installation, Programming Operation, & Maintenance Manual

Page: 62 / 137

Chapter 5 – Parameter List
5-19
5.11 [APP] Application parameter group
CODE
Comm.
Addr
Description
LCD Keypad
Display
Setting Range
Run
Adj.
Page
APP-00 9600 Jump to Desired Code # Jump Code 1 to 78
6-33
APP-01 9601 PID F Gain Selection PID F Gain 0 to 999.9[%]
APP-02 9602
PID Auxiliary Reference Mode
Selection
Aux Ref Mode
0 (No)
1 (Yes)
APP-03 9603
PID Auxiliary Reference Signal
Selection
Aux Ref Sel
0 (Keypad-1)
1 (Keypad-2)
2 (V1)
3 (V1S)
4 (I)
5 (V1+I)
6 (Pulse)
7 (Int. 485)
8 (Ext. PID)
APP-04 9604 PID Feedback I Max Limit PIDFB I Max 0.00 to 20.00mA
APP-05 9605 PID Feedback V1 Max Limit PIDFB V1 Max 0.00 to 12.00V
APP-06 9606 PID Feedback Pulse Max Limit PIDFB P Max 0.0 to 100.0kHz
APP-09 9609 D Gain for PID Control PID D Time 0.0 to100.0 [msec]
APP-12 960C PID Output Scale PID OutScale 0.0 to 999.9 [%]
APP-13 960D PID P2 Gain PID P2 Gain 0.0 to 999.9 [%]
APP-14 960E P Gain Scale P Gain Scale 0.0 to 100.0 [%]
APP-17 9611 PID U curve feedback select PID U Fbk
0 (No)
1 (Yes)
APP-20 9614 2nd Acceleration Time 2nd Acc Time 0 to 6000 [sec]
APP-21 9615 2nd Deceleration Time 2nd Dec Time 0 to 6000 [sec]
APP-22 9616 2nd Base Frequency 2nd BaseFreq 30.00 to FG1-30 [Hz]
6-34
APP-23 9617 2nd V/F Pattern 2nd V/F
0 (Linear)
1 (Square)
2 (User V/F)
APP-24 9618 2nd Forward Torque Boost 2nd F Boost 0.0 to 15.0 [%]
APP-25 9619 2nd Reverse Torque Boost 2nd R Boost 0.0 to 15.0 [%]
APP-26 961A 2nd Stall Prevention Level 2nd Stall 30 to 150 [%]
APP-27 961B
2nd Electronic Thermal Level for 1
minute
2nd ETH 1min APP-28 to 200 [%]
APP-28 961C
2nd Electronic Thermal Level for
continuous
2nd ETH Cont 50 to 150%
APP-29 961D 2nd Rated Motor Current 2nd R Curr 1.0~999.9A
APP-40 9628
Number of Running Auxiliary
Motors Display
Aux Mot Run *
Display
APP-41 9629 Aux. Motor Start Selection Starting Aux 1 to 4
APP-42 962A Auto Alternation Time Display Auto Op Time *
Display
APP-44 962C Aux motor First-In and Last-Out F-in L-out
0 (No)
1 (Yes)
APP-45 962D All Aux. motors Simultaneous Stop All Stop
0 (No)
1 (Yes)
APP-66 9642 Auto Change Mode Selection AutoCh Mode
0 (None)
1 (Aux)
2 (Main)
APP-67 9643 Auto Change Time AutoEx Intv 00:00 to 99:00 (h)