4 - OPERATING INSTRUCTIONS
Parking the unit
Parking the machine
WARNING
Fall hazard!
Jumping on or off the machine could cause an injury. Always face the machine, use the handrails
and steps, and get on or off slowly. Maintain a three-point contact to avoid falling: both hands on the
handrails and one foot on the step, or one hand on the handrail and both feet on the steps.
Failure to comply could result in death or serious injury.
W0141A
1. Park the machine on a hard and level ground, and ori-
ent the upper structure frame parallel to the undercar-
riage.
2. Operate the boom, arm, and attachment controls so
that the arm stands vertical and the attachment rests
on the ground.
3. Set the gate lock lever to central position (the safety
bar is in inward position).
GHN2P4-004A
1
4. Turn the engine throttle
(1)
to low idle position.
5. Let the engine run for about
5 min
NOTICE:
If the engine is stopped suddenly, the lubri-
cated section on the turbocharger gets dried from the
high heat, leading to a turbocharger failure.
SMIL15CEXY892AB
2
6. Turn the starter key
(2)
to OFF position.
NOTE:
If the security function is set up, it can be ac-
tivated according to the procedure described on page
4-1
SMIL15CEXY892AB
3
4-20
Summary of Contents for CX130C
