Case CX130C, Operator'S Manual

Page: 51 / 282

3 - CONTROLS AND INSTRUMENTS
E. Suspension adjustment
• Turn the seat height knob
(1) clockwise to adjust the
seat firmness.
SMIL16CEX0287AB
6
F. Console and seat slide adjustment
• Pull the slide lever
(4) to adjust the overall position.
• When you have found the correct forward-back posi-
tion, release the lever (4) to fasten in place.
SMIL16CEX0291AB
7
G. Seat pocket
The rear side of the backrest has a pocket. Use this
pocket to store the operator's manual etc.
H. Seat belt
WARNING
Equipment failure could cause accident or in-
jury!
Always fasten the seat belt securely before
you operate the machine. Inspect seat belt
parts for wear and damage. Replace any and
all worn or damaged parts of the seat belt prior
to operation.
Failure to comply could result in death or se-
rious injury.
W0046C
NOTICE: If the seat belt has been used for a long time
and there is visible damage or unraveling or the fittings
are deformed or damaged, replace the seat belt. Even
if there is nothing visibly abnormal, replace the seat belt
every 3 years.
Always fasten the seat belt before starting to operate the
machine.
Check that the seat belt is not twisted, then insert into the
buckle.
Make sure that the seat belt is securely locked.
SMIL16CEX0292AB
8
3-5