Case CX130C, Operator'S Manual

Page: 85 / 282

3 - CONTROLS AND INSTRUMENTS
CLOCK ADJUST setting
The sixth tab of the user information mode allows to set
the clock on the display.
Press the button (2) to show the setting frame.
ETGE0B-004
19
Press the button (1) or (2) to select between hours or min-
utes.
Press the button (3) or (5) to set the correct value of either
hours or minutes.
When the clock has been set, press the button (4) to return
to the user information mode.
If other settings are needed, press the button (3) to scroll
down to the next tab.
Otherwise, press the button (4) to reset the operating
mode of the display.
ETGEOB-005
20
AUXILIARY HYDRAULICS setting
The seventh tab of the user information mode allows to set
the circuit type and the maximum flow rate of the auxiliary
high-flow hydraulic circuit.
Press the button
(2) to show the setting frame.
8KYGS8-002
21
1. Press the button (3) or (4) and select "ATTACHMENT
TYPE".
2. Press the button (1) or (2) and select " BREAKER" or
"CRUSHER" for attachment type.
AXFRYQ-002
22
3-39