Case CX130C, Operator'S Manual

Page: 194 / 282

6 - MAINTENANCE
6. Tighten the body with the specific wrench. The tighten-
ing torque must be 28 – 32 N·m ( 20.65 – 23.60 lb ft )
QOIPZB-010
3
7. Replace the seal of the drain plug (1) , and attach the
drain plug (1) . The tightening torque must be 2 – 3 N·m
( 1.48 – 2.21 lb ft ).
NOTE: Never reuse the seal of the filter body and the seal
of the drain plug (1) . They shall always be replaced with
new seals.
8. Tighten the air bleed plug (2) . The tightening torque
must be 8 – 12 N·m ( 5.9 – 8.9 lb ft )
NOTICE: Overtightening can damage the seals.
9. If the additional pre-filter on the right-hand side of the
compartment is equipped, repeat steps 3 to 8 to replace
the element of the other fuel pre-filter.
10. Bleed the fuel system. Refer to page 6-9 .
SMIL17CEX0182AA
4
6-44