Case CX130C, Operator'S Manual

Page: 242 / 282

7 - TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION
Insufficient warming-up Perform warming-up
Too much engine oil Adjust to the appropriate oil amount
Failure of the engine control system
Failure of the supply pump
Failure of the fuel system
Consult your CASE CONSTRUCTION
Dealer
The exhaust smoke is white.
Continuous idling for a long period
(more than two hours)
Raise the engine speed and confirm
that white smoke is not emitted
Failure of the engine control system
Failure of the supply pump
Consult your CASE CONSTRUCTION
Dealer
Clogging of the air cleaner Clean or replace the element
Failure of the fuel system
Clogging of the exhaust system
The exhaust smoke is black.
Diesel Particulate Diffuser is faulty
Consult your CASE CONSTRUCTION
Dealer
No coolant Refill
Front of the radiator is clogged with
filth
Perform cleaning
Reserve tank cap not fully tightened
Tighten it securely or replace the cap
with a new one
Coolant is dirty
Clean inside the radiator and replace
the coolant
Failure of the fan clutch
Consult your CASE CONSTRUCTION
Dealer
Reserve tank cap dirty or faulty Clean or replace the reserve tank cap
Overheat occurs.
Excessive engine oil
Keep the oil at appropriate level
Inappropriate engine oil viscosity
Replace it with oil with appropriate
viscosity
Amount of engine oil is insufficient Refill
Failure inside the engine
Failure of meters, lights or switches
Oil pressure does not increase.
Oil leakage from the oil filter hose
Consult your CASE CONSTRUCTION
Dealer
Clogging of the air cleaner Clean the element
Clogging of the fuel filter
Remove moisture and replace the
element
Clogging of the pre-fuel filter Clean the element
Failure of the engine control system
Consult your CASE CONSTRUCTION
Dealer
Clogging of the supply pump strainer Clean the strainer
Failure of the engine
Engine does not have enough power.
Diesel Particulate Diffuser is faulty
Consult your CASE CONSTRUCTION
Dealer
7-2