Case CX130C, Operator'S Manual

Page: 70 / 282

3 - CONTROLS AND INSTRUMENTS
Right-hand side controls
Right-hand side controls
SMIL20CEX1387EA
1
(1) Starter switch ( 4 positions ): ON (contact), START
(engine ignition), OFF (engine shut-down) and ACC (ac-
cessory current supply).
NOTICE: when the starter key is in ON position, if the
anti-theft protection has been programmed, it will be nec-
essary to enter the password. Refer to page
Engine
starting system - Start .
NOTE: the starter key is also used to lock the cab door,
the DEF/A
D
B
LUE
® tank cover, the engine hood, the front
storage box, the side doors and the fuel tank cap.
(2) Engine speed throttle and work mode selector.
(3) Engine low idle speed button: the engine low idle
speed button enables to set the engine speed to low idle
at a touch without moving the engine speed throttle. If
operating at engine speed different from low idle, press
and release the engine low idle speed button to get down
the engine speed to low idle. Press and release the but-
ton again to resume the engine speed set by the engine
speed throttle.
(4) Arm angle adjustment lever: the lever enables the
control arm to be adjusted in different inclines in accor-
dance with the operator's body profile. Hold the lever and
select the desired position, and then release the lever.
NOTE: stop the engine when adjusting the control arm.
(5) Not active.
(6) One-touch wiper button: press and hold down the but-
ton to operate the wiper.
(7) Auxiliary port.
(8) USB port.
(9) Radio.
(10) Travel alarm switch.
(11) Rotary light switch: this control is used to turn the
rotating warning light on or off. When you press ON (op-
erate), the rotating warning light and the indicator lamp
on the switch light up. When you press OFF (stop), the
rotating warning light goes out.
(12) Beverage can holder.
3-24