Case CX130C, Operator'S Manual

Page: 225 / 282

6 - MAINTENANCE
WARNING
Pressurized fluid can penetrate the skin and
cause severe injuries.
The grease in the cylinder is under high pres-
sure. Never loosen the grease fitting adaptor
completely in order to speed up the flow of
grease.
Failure to comply could result in death or seri-
ous injury.
W0261A
To reduce the tension:
1. Turn the grease fitting adapter about 3 times to
loosen it and drain grease from the cylinder.
2. When the track tension is correct, tighten the
adapter.
3. Clean the grease adapter and fitting, then lower the
track to the ground.
4. Repeat the same operations for the other track.
NOTICE: if the grease fitting adaptor is damaged, grease
may leak out. Check the condition of the grease fitting
adaptor regularly and replace it if necessary.
WRQF7U-001
7
Fuel tank strainer
Clean the fuel tank strainer periodically
Remove the fuel tank strainer, inspect it for damage.
If damaged, discard and replace. If in good condition,
clean it in an environmentally safe manner. Diesel fuel
is a preferred cleaning agent. Fuel must not be added
to the tank unless the strainer is in place and in good
working condition.
SMIL17CEX0176AA
1
6-75