Case CX130C, Operator'S Manual

Page: 104 / 282

3 - CONTROLS AND INSTRUMENTS
Battery disconnect switch
The battery disconnect switch is located near the batter-
ies. It can thus be reached by opening the rear left-hand
door.
The battery disconnect switch allows to cut off any power
supply in the electrical system of the machine.
NOTE: When the switch is turned to OFF position, all elec-
trical circuits are cut off and the stations stored on the ra-
dio presets and the time set for the clock will be cleared.
SMIL16CEX2182AA
3
The battery disconnect switch shall be in ON position for
normal operation.
82A9587D
4
The battery disconnect switch shall be turned to
OFF position only when taking the actions below for
inspection, repair and welding:
1. Batteries removal.
2. Electrical system connectors removal.
3. Service on the electrical system.
4. Long-term storage.
NOTICE: Never turn the battery disconnect switch to OFF
position with the engine running. This could damage the
electrical system.
The battery disconnect switch shall never be turned to
OFF position within
3 min after the engine is stopped.
NOTICE: Never turn the battery disconnect switch to OFF
position within 3 min after the starter key is turned off. The
machine control system and the engine control system will
be damaged.
SMIL16CEX1777AB
5
3-58