Case CX130C, Operator'S Manual

Page: 263 / 282

9 - ACCESSORIES
Operating guidelines for usage of hydraulic attachments
Always select an hydraulic attachment which is suitable for installation on the machine, in order to avoid severe dam-
ages to the machine frames and to the machine systems. Make sure to select an hydraulic attachment which does
not compromise the overall machine stability. Make sure to select an hydraulic attachment which properly matches
the capacity of the auxiliary hydraulic circuit of the machine.
NOTICE: make sure to know the maximum working pressure allowed by the attachment. Look for "Relief pressure
range" or "Maximum pressure range" information into the specification sheet of the attachment. Set the maximum
working pressure of the auxiliary hydraulic circuit according to this specification. The attachment will operate properly
and effectively, and serious damages will be avoided to the attachment and to the machine.
Contact your CASE CONSTRUCTION dealer for selection and provision of the mounting bracket for the attachment,
and for selection and provision of the connecting hoses between the auxiliary hydraulic circuits and the attachment.
Make sure to read and understand the Operator's Manual of the hydraulic attachment.
Always refer to the Operator's Manual of the hydraulic attachment for proper and safe installation of the attachment
to the machine.
Always refer to the Operator's Manual of the hydraulic attachment and to the following instructions in this manual for
proper and safe usage of the attachment.
Always refer to the Operator's Manual of the hydraulic attachment for proper maintenance of the attachment. Always
refer to the Operator's Manual of the machine for specific maintenance schedule related to the usage of any attach-
ment other than a bucket (refer to the next page).
If not using any hydraulic attachment, make sure to apply the blanking plugs on the feed valves and on the connecting
hoses to the attachment in order to avoid the penetration of foreign bodies.
9-9