Case CX130C, Operator'S Manual

Page: 90 / 282

3 - CONTROLS AND INSTRUMENTS
Radio
352C5814
1
NOTICE: Do not let water get into the speaker cases or
the radio to avoid a breakdown. Keep the window closed
when it rains and when washing the machine. Do not use
benzene, paint thinner or any other solvent to clean the
display. Wipe off the water with a soft, dry cloth. Do not
try to disassemble the radio.
1. Power button (POWER)
Push the "POWER" button to turn on the radio. The
band and then then the frequency are displayed.
Push again the "POWER" button to turn off the radio.
The clock is displayed.
2. Sound adjustment (SOUND)
Push the "SOUND" button to switch BAL → TRE →
BAS .
- In BAL state: push the
/ tuning button (7) the
regulate the balance.
Push the
UP button to increase the right speaker
volume; push the DOWN button to increase the left
speaker volume. The volumes can be increased up to
the level 7 maximum.
- In TRE state: push the
/ tuning button (7) to reg-
ulate the treble.
Push the
UP button to increase the treble of 1 step;
push the DOWN button to decrease the treble of 1
step. The treble can be increased up to the level 7
maximum.
- In BAS state: push the
/ tuning button (7) to reg-
ulate the bass.
Push the
UP button to increase the bass of 1 step;
push the DOWN button to decrease the bass of 1
step. The treble can be increased up to the level 7
maximum.
Push again the “SOUND” button in BAS state to end
the sound adjustment.
3. Display unit
The display shows the clock, radio frequency, band
name and operation mode.
4. Clock/Frequency button (DISP)
Push the “DISP” button to show: “Frequency” →
“Clock” → “Band name”.
Each push changes the visualization.
The display returns automatically to the frequency vi-
sualization if no button is pushed within 1 second.
5. Auto store (SOUND/AUTO PRESET)
Push the button to store 6 radio stations in the memory
for the selected signal band (FM1, FM2, AM).
6. Choose of the preset radio stations (PRESET STA-
TION)
Push the button (1-6) to tune the radio to the stored
station on the selected signal band (FM1, FM2, AM) .
To store a radio station in the memory, tune the radio
to the station desired and hold down one of the button
(1-6).
7. Tuning button (TUNE)
Push and hold the "TUNE" button to tune automati-
cally the radio to the next station. To stop the tuning,
release and push again the button.
Push the
button to increase the frequency; push the
button to decrease the frequency. Hold down either
button to change the frequency continuously.
8. Mode switch button (MODE)
Push the button to switch AM → FM1 → FM2 → AUX
→ USB → BT.
9. Volume adjustment buttons (VOL , VOL )
Push the VOL button to decrease the volume; Push
the VOL button to increase the volume. Hold down
either button to change the volume continuously.
10. Clock adjustment (DISP)
To adjust the clock, push and hold the "DISP" button
when the clock is shown on the display.
- Hour adjustment
With the hour on the display flashing, use the tuning
button
/ to adjust the value.
Push the UP button to increase the value.
Push the DOWN button to decrease the value.
Pressing the “DISP” button shifts from hour to minute
adjustment.
- Minute adjustment
With the minutes on the display flashing, use the tun-
ing button
/ to adjust the value.
Push the UP button to increase the value.
Push the DOWN button to decrease the value.
3-44