Case CX130C, Operator'S Manual

Page: 113 / 282

4 - OPERATING INSTRUCTIONS
4 - OPERATING INSTRUCTIONS ###_4_###
Starting the unit
Anti-theft protection
A security function can be set up in order to prevent an undesired usage of the machine, or even the theft of the ma-
chine. The security function locks the display by a password when the machine is started. Furthermore, the security
function limits the machine functionality as the engine is started without entering the password.
The set up of the security function is indicated by a specific icon on the display:
The security function is set up.
To set up the security function and the password, consult the CASE CONSTRUCTION dealer.
NOTICE: Consult the CASE CONSTRUCTION dealer in case of forgotten password.
Activation of the security function
The activation of the security function has to be decided
when shutting down the engine.
To activate the security function, turn the starter key to
OFF position, then to ON position, finally to OFF position
again after 2 sec. A warning alarm sounds, and the secu-
rity function icon is displayed.
At the next machine start, the request for entering the
password will be displayed.
As the key is turned to ON position, the request for enter-
ing the password is displayed.
AZ8P3X-001
1
4-1