Carrier TruVu TV-MPCXP1628-NR, Installation And Startup Manual

Page: 8 / 94

What is the TruVu™ MPC Controller (part no. TVMPCXP1628 -NR)?
TruVu™ MPC Controller ( part no. TV-MPCXP1628-NR) CARRIER CORPORATION ©2021
Installation and Start-up Guide All rights reserved
2
Port Port type For this type of
communication...
At...
Gig-E 10/100/1000 Mbps Ethernet BACnet/IP
BACnet/Ethernet
Modbus TCP/IP
10, 100, or 1000 Mbps
(1 Gbps)
S1 High-speed EIA-485 port BACnet/ARCNET
BACnet/MSTP
Modbus Serial
156 Kbps
9.6 to 115.2 kbps
9.6 to 115.2 kbps
S2 Electrically isolated EIA-485 port Modbus Serial 9.6 to 115.2 kbps
Service
Port
10/100 Mbps Ethernet
HTTP/IP
BACnet/IP Service Port 10 or 100 Mbps
On the non-routing controller:
•
Only one port can be configured for a BACnet communication type.
•
The Gig-E port can run Modbus simultaneously with either BACnet/IP or BACnet/Ethernet.
The TV-MPCXP1628-NR also has the following ports:
•
I/O Bus port for wired TruVu™ MPC I/O expanders
•
I/O bus edge connector for directly- connected TruVu™ MPC I/O expande rs (DC only)
•
Rnet port for ZS sensors, Wireless Adapter for wireless sensors, an Equipment Touch, and an TruVu™ ET
Display
•
USB port for recovery
•
Act Net port for i-Vu® Smart Valves
Specifications
Driver drv_fwex_< version >.driverx
Maximum number of control programs* 999
Maximum number of BACnet objects* 12000
Third-party BACnet integration points 1500
Third-party Modbus integration points 200
* Depends on available memory.