Troubleshooting
TruVu™ MPC Controller (
part no. TV-MPCXP1628-NR)
CARRIER CORPORATION ©2021
Installation and Start-up Guide
All rights reserved
79
To replace the fuse:
1
Turn off the TV-MPCXP1628-NR's power switch.
2
Remove the red power connector.
3
Remove the blue output connectors, if present.
4
On both ends of the TV-MPCXP1628-NR, insert a small flathead screwdriver as shown below, and then gently
pry up the cover until it is released from the base.
5
Remove the cover from the base.
6
Remove the blown fuse.
7
Snap the new fuse into the fuse holder.
8
Replace the TV-MPCXP1628-NR's cover.
9
Replace the power connector and the output connectors.
10
Turn on the TV-MPCXP1628-NR's power switch.
11
Verify the
LEDs on the TV-MPCXP1628-NR and any downstream expanders are lit.
To take the TV-MPCXP1628-NR out of service
If needed for troubleshooting or start-up, you can prevent the i-Vu® application from communicating with the TV-
MPCXP1628-NR by shutting down communication from the TV-MPCXP1628-NR to the i-Vu® application. When
Out
of Service
, i-Vu® no longer communicates properties, colors, trends, etc.
1
On the i-Vu® navigation
tree, select the TV-MPCXP1628-NR.
2
On the
Properties
page, check
Out of Service
.
3
Click
Accept
.
Summary of Contents for TruVu TV-MPCXP1628-NR
Page 2: ......
Page 4: ......
Page 93: ......
Page 94: ...CARRIER CORPORATION 2021 Catalog No 11 808 793 01 2 18 2021...