Carrier TruVu TV-MPCXP1628-NR, Installation And Startup Manual

Page: 68 / 94

To set up the controller through the Service Port
TruVu™ MPC Controller ( part no. TV-MPCXP1628-NR) CARRIER CORPORATION ©2021
Installation and Start-up Guide All rights reserved
62
2
Turn off the computer's Wi-Fi if it is on.
3
If your computer uses a static IP address, use the following settings:
○
Address: 169.254.1.x, where x is 2 to 7
○
Subnet Mask: 255.255.255.248
○
Default Gateway: 169.254.1.1
If it uses a DHCP address, leave the address as it is.
4
Open a web browser on the computer.
5
Navigate to http://local.access or http://169.254.1.1 to see the Service Port controller setup pages.
NOTE The first time you access the controller in the i-Vu® interface after you have changed settings through the
Service Port, be sure to upload the changes to the system database. This will preserve those settings when you
download memory or parameters to the controller.
ModStat tab
This tab provides the controller's Module Status report that gives information about the controller and network
communication status. See Appendix - Module Status field descriptions (page 81).
Device tab
BACnet Object
Device Instance Autogenerated — (Default) The Device ID is automatically set to a number equal to
the (IP network number) x 100 + rotary switch address.
Assigned — Lets you enter a specific number that is unique on the BACnet network.
Device Name Autogenerated — (Default) The Device Name is automatically set as the word
the Device Instance. For example, device2423911.
Assigned — Lets you enter a specific name that is unique on the BACnet network.
Device Location You can enter an intuitive location for the device in the i-Vu® interface.
Device Description You can enter an intuitive description for the device in the i-Vu® interface.
Configuration
APDU Timeout How many milliseconds the device will wait before resending a message if no
response is received.
APDU Segment Timeout How many milliseconds the device will wait before resending a message segment
if no response is received.