Canon IPF850 User Manual Download Page 457

Page: 457 / 694

Setting Item

Description, Instructions

Inter-
face
Setup

TCP/IP

IPv4

DNS
Settings

DNS Host Name

Specify the DNS host name.

DNS Domain Name

Specify the DNS domain name.

IPv6

IPv6 Support

Specify whether to connect via IPv6.

IPv6 StlessAddrs

Specify whether a IPv6 stateless address is used.

DHCPv6

Specify whether DHCPv6 settings are used.

DNS
Settings

DNS
Dync
update

Statefull
Addr

Specify whether DNS server registration is updated auto-
matically.

State-
less
Addr

Pri. DNS SrvAddr

Specify the DNS server address.

Sec. DNS SrvAddr

DNS Host Name

Specify the DNS host name.

DNS Domain Name

Specify the DNS domain name.

Ether-
net
Driver

Auto Detect

Specify the communication method. To apply your
changes, choose

Register Setting

Choose

for automatic configuration of the LAN com-

munication protocol. Choose

Off

to use settings values of

Comm.Mode

and

Ethernet Type

Comm.Mode

Choose the LAN communication method.

Ethernet Type

Choose the LAN transfer rate.

Spanning Tree

Choose whether spanning-tree packets are supported
over the LAN.

MAC Address

Indicates the MAC address.

Interface Print

Print interface settings information.

Return Defaults

Choose

to restore

Interface Setup

settings to the de-

fault values.

System
Setup

Sleep Timer

Specify the period before the printer enters sleep mode.

Shut Down Timer

Sets the time until the printer turns off automatically. If no
operations are performed on the printer for the duration of
the time set in

Shut Down Timer

after entering Sleep

mode, the printer automatically turns off.

Buzzer

Choose

for the buzzer to sound once for warnings and

three times for errors.

Contrast Adj.

Adjust the Display Screen contrast level.

Date &
Time

Date

Set the current date.

Time

Set the current time. Available only if the

Date

setting is

specified.

Date Format

Specify the date format.

Language

Specify the language used on the Display Screen.

Time Zone

Specify the time zone. Time zone options indicate a main
city in this time zone and the difference from Greenwich
Mean Time.

Length Unit

Choose the display unit for length. Change the unit dis-
played for the remaining amount of roll paper,

Tot.Print

Area

, and so on.

Detect Mismatch

Specify printing behavior if the type and size of paper
specified in the printer menu does not match the type and
size in the printer driver.

iPF850

Menu Settings

User's Guide

Control Panel

Printer Menu

457

Summary of Contents for IPF850























































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for IPF850

Reviews:

Related manuals for IPF850

Brands by name

Popular brands

Canon IPF850, User Manual

Search results

Summary of Contents for IPF850

Reviews:

Related manuals for IPF850

Brands by name

Popular brands