manualshive.com logo in svg

Canon EOS R, Advanced User'S Manual

Share
Download
Canon EOS R Advanced User'S Manual Download Page 592

592

Troubleshooting Guide

The image is out of focus or blurred.

 

●

Set the lens’s focus mode switch to <

AF

> (p.50, 53).

 

●

Press the shutter button gently to prevent camera shake (p.56).

 

●

With a lens equipped with an Image Stabilizer, set the IS switch to 

<

1

>.

 

●

In low light, the shutter speed may become slow. Use a faster 

shutter speed (p.134), set a higher ISO speed (p.83), use flash 

(p.177), or use a tripod.

 

●

See “Minimizing Blurred Photos” on page 124.

I cannot lock the focus and recompose the shot.

 

●

Set the AF operation to One-Shot AF. Shooting with the focus 

locked is not possible with Servo AF (p.126, 262).

The continuous shooting speed is slow.

 

●

The continuous shooting speed for high-speed continuous shooting 

may be lower, depending on conditions such as these: battery 

level, temperature, flicker reduction, Dual Pixel RAW shooting, 

Silent LV shooting, shutter speed, aperture, subject conditions, 

brightness, AF operation, type of lens, use of flash, and shooting 

settings (p.144). 

Summary of Contents for EOS R





































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands