Canon EOS R Advanced User'S Manual Download Page 324

Page: 324 / 644

324

Enjoying Movies

You can play back and enjoy the captured movies mainly in the

following three ways.

Playback on a Television

(p.333)

By connecting the camera to a television

with an HDMI cable, you can play back

the captured still photos and movies

on the television. Using the HDMI

Cable HTC-100 (sold separately) is

recommended.

Even if the camera is connected to a hard disk recorder with a interface

cable, movies and still photos cannot be played back or saved.

Playback on the Camera Screen

(p.325)

You can play back movies on the camera

screen. You can also edit out the movie’s

first and last scenes and can play back

the still photos or movies on the card in

an automatic slide show.

Playback and Editing with a Computer

The movie files recorded on the card

can be imported to a computer and

played back or edited with pre-installed

or general-purpose software.

To play back or edit movies with commercially available software, use

software compatible with the file format of your movies. For details on

commercially available software, contact the software manufacturer.

Summary of Contents for EOS R





































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for EOS R

Reviews:

Brands by name

Popular brands

Canon EOS R, Advanced User'S Manual

Search results

Summary of Contents for EOS R

Reviews:

Brands by name

Popular brands