Canon EOS R Advanced User'S Manual Download Page 374

Page: 374 / 644

374

Formatting the Card

Format the card in the following cases:

The card is new.

The card was formatted by a different camera or a computer.

The card is full of images or data.

A card-related error is displayed

(p.607).

Low-Level Formatting

Perform low-level formatting if the card’s writing or reading speed

seems slow or if you want to totally erase the data on the card.

Since low-level formatting will format all recordable sectors on the

card, the formatting will take longer than normal formatting.

During low-level formatting, you can cancel formatting by selecting

[Cancel]

. Even in this case, normal formatting will already be

complete and you can use the card as usual.

Card’s File Formats

SD/SDHC cards will be formatted in FAT32. SDXC cards will be

formatted in exFAT.

When shooting a movie with a card formatted in exFAT, the movie

will be recorded in a single file (instead of being split into multiple

files) even if it exceeds 4 GB. (The movie file will exceed 4 GB.)

Summary of Contents for EOS R





































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for EOS R

Reviews:

Brands by name

Popular brands

Canon EOS R, Advanced User'S Manual

Search results

Summary of Contents for EOS R

Reviews:

Brands by name

Popular brands