manualshive.com logo in svg

Canon EOS R, Advanced User'S Manual

Share
Download
Canon EOS R Advanced User'S Manual Download Page 53

53

Attaching and Detaching EF/EF-S Lenses

4 

Set the lens’s focus mode switch to 

<AF>.

 

z

<

AF

> stands for autofocus.

 

z

<

MF

> stands for manual focus. 

Autofocus will not operate.

5 

Remove the front lens cap.

Detaching the Lens

1 

While pressing the lens release button, 

turn the adapter as shown by the arrow.

 

z

Turn the adapter until it stops, then 

detach it.

2 

Detach the lens from the adapter.

 

z

Hold down the lens release lever 

on the adapter and turn the lens 

counterclockwise.

 

z

Turn the lens until it stops, then 

detach it.

 

z

Attach the rear lens cap to the 

detached lens.

For lens precautions, see page 51.

Summary of Contents for EOS R





































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands