manualshive.com logo in svg

Canon EOS R, Advanced User'S Manual

Share
Download
Canon EOS R Advanced User'S Manual Download Page 10

10

Compatible Cards

The following cards can be used with the camera regardless of 

capacity. 

If the card is new or was previously formatted (initialized) 

by another camera or computer, format the card with this camera

 

(p.373). 

 

z

SD/SDHC/SDXC memory cards

* 

UHS-II and UHS-I cards supported.

Cards that Can Record Movies

When shooting movies, use a large-capacity card with good enough 

performances (fast enough writing and reading speeds) to handle the 

movie recording quality. For details, see page 611.

In this manual, “card” refers to SD memory cards, SDHC memory 

cards, and SDXC memory cards.

* 

The camera does not come with a card for recording photos/

movies.

 Please purchase it separately.

Summary of Contents for EOS R





































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands