Troubleshooting
69
401
Front cover
is open
Close the front cover to start printing.
402
Print head is
not attached
Attach the print head. If the print head is attached, remove the print
head, make sure that the contact sections are clean, and then reattach
the print head.
611/612
Time Out is activated
during
communication with
the digital camera
OR
A message, to the
effect that the main
unit does not support
the digital camera,
is sent
Remove the connected cable to reset the error. Reconnect the cable to
the digital camera, and then start printing. For instructions on printing
from a digital camera, see the user’s guide that comes with the digital
camera.
802, 803,
809
Error occurred
in printer
Press the
Cancel
button to stop printing, turn off the printer, wait
awhile, and then turn on the power again. If the condition does not
improve, contact the store where you bought the printer or a nearby
repair center.
– E –
Photo cannot be read
from memory card
(indicator lamp does
not go on)
Properly set a memory card that can be used. See “Using a Memory
Card” on page 24.
If a memory card is already set, eject the card, set it again, and check
that the indicator lamp goes on.
If the error is not corrected by the above procedure, turn off the printer,
unplug the power cord, and then turn on the power again.
Error
Number
Problem
Try This
S830D QSG.book Page 69 Monday, April 29, 2002 4:30 PM
