AFX SERIES® OPERATION MANUAL
SECTION 6:
Entire Contents Copyright
2018 by Pacific Power Source, Inc. (PPS)
• All Rights Reserved • No reproduction without written authorization from PPS.
AFX Series Power Source Operation Manual
Page 157 of 402
6.8.6
UNIT INFORMATION Screen
The UNIT INFORMATION screen is an information only screen that contains information
about the power source and is accessed from the SYSTEM SETTINGS screen using the “Unit
info” soft key (SK3).
Figure 6-33: UNIT INFORMATION Screen
The following information is provided on this screen:
Unit Number
Shows the position of this unit in a string of paralleled
power sources. For a stand-alone power source, the display
will show 1 of 1.
Front panel status
Shows the status of the front panel. Only the MASTER unit
in a multi-unit system will have its front panel enabled.
Front panel FW ver.
Firmware revision of the front panel control processor.
Power stage FW ver.
Firmware revision of the power stage processors.
Hardware revision
Hardware build revision.
Serial number
Unit Serial number.
Model
Model number, typically 3xxxAFX where xxx = power rating.
Note: This information is for information purposes only and cannot be changed by the
operator.
The following soft keys are available from the UNIT INFORMATION screen:
SOFT KEY
Description
Next Unit (SK1)
If this unit is part of a parallel system, information on the next unit
in the chain will be displayed.
Previous Unit
(SK2)
If this unit is part of a parallel system, information on the previous
unit in the chain will be displayed.
-
-
Back (SK5)
Returns to the previous screen.
Table 6-29: Available UNIT INFORMATION screen soft keys
