AFX SERIES® OPERATION MANUAL
SECTION 6:
Entire Contents Copyright
2018 by Pacific Power Source, Inc. (PPS)
• All Rights Reserved • No reproduction without written authorization from PPS.
AFX Series Power Source Operation Manual
Page 133 of 402
Coupling
This field selects the output coupling mode of the power
source. Unless an optional output transformer is installed
with the power source (T Option), this field is always fixed
to DIRECT. Direct coupling output mode supports either AC
mode, DC mode or a combination of AC and DC output to
be programmed. If the optional transformer is installed, the
AFX model number will show “AFXT” to indicate the
presence of the output transformer. To use the output
transformer coupled range, selected XFMR (xxxV) in this
field. The voltage indication may vary based on the
transformer ration of the installed output transformers.
Note: While in XFMR coupled mode, only AC voltage
programming is possible.
Access to other utility screens is available from the UNIT CONFIGURATION screen through
the soft keys. The table below lists the available soft keys on the UNIT CONFIGURATION
screen.
SOFT KEY
Description
User Limits (SK1)
Displays SETUP MENU screen. Refer to section 6.7.2
Ramp & Slew (SK3)
Displays SLEW RATE MENU screen. Refer to section 6.7.3
Program Memory (SK2)
Displays PROGRAM MEMORY screen. Refer to section 6.7.4
CSC Config. (SK4)
Display CSC setting screen
Next Screen (SK5)
Toggle to alternate UNIT CONFIGURATION screen
Table 6-15: Available UNIT CONFIGURATION 1 screen soft keys
