Calrec Zeta, Operator'S Manual

Page: 90 / 144

90 Zeta
Digital Broadcast Production Console
COndItIOn SwItCHIng
this screen provides a mechanism for
the system’s condition switching to be
set up.
There are three modes which the system
can be in: Transmit (TX or On Air),
Rehearse, or Neither. These are controlled
from the ON AIR and REH buttons on the
broadcast facilities panel or from external
inputs set up on the GPI screen.
Each function can be set to be active, or
not, in any of the three states (except for
the “On Air” and “Reh” optos which can
only override the desk buttons or not).
The functions provided are to cater for
different requirements. Therefore some
combinations of settings will seem invalid.
Save Options to Disk and Flash
The Options screens are used to preset
the system to the required settings. These
settings are not stored in the individual
console memories but are saved and
loaded separately. Changes to options
take effect as soon as they are made, but,
if they are not saved, the next time the
desk boots up the options will revert to
their previous settings.